Cold Pour Crack Filler- Crack Attack 90 (CA-90) CA-90 is a specially formulated cold pour rubberized crack filler. This product was specially developed to meet the demands of industry. Our product meets or exceeds Alberta Transportation Specifications (EC-101). Application: When applying the CA-90 Crack filler product to a pavement surface the following are considered guidelines: – Recommended daytime application temperature is 10⁰C with no freezing temperatures or rain expected overnight. – Clean loose debris from the crack and the immediately surrounding area of interest with the use of a broom, air compressor or other equipment. – Place a generous amount of CA-90 into the area of interest using a pump system, pour pot or pressure tank. Once applied, immediately guide the material into the crack using a putty knife or V shaped squeegee. – When properly applied CA-90 is designed to develop a skin large enough to eliminate vehicle tracking within 10-30 minutes. (Humidity and temperature will affect curing time.) Product Specification: Solids Content Minimum 60% – ASTM D244 Ash Content Maximum 2% – TLT-229 Rate of Curing 24 hours Minimum 50% – TLT-230 Rate of Curing 6 days Minimum 80% – TLT-230 Stormer Viscosity 70-90 – TLT-227 Low Temperature Flexibility Pass at -4⁰C – TLT-231 Availability: CA-90 is available in the following: 20L Pails 205L Drums 1000L Totes Bulk Other: – Some large cracks may require refilling as material settles or cures. – If tracking is an issue, Portland cement powder or clean sand may be applied to the surface. – Do not allow the product to freeze. The recommended minimum storage temperature is 10⁰C – Material storage and application temperature 10-75⁰C (heating is not required however increased temperatures may speed up skinning and curing rates). – Material can be cleaned up using mineral spirits or Western Asphalts Black Attack Hand cleaner.

Crack Filling Equipment Rental
More info

Application Video and Pictures:

[evp_embed_video url=”http://westernasphalt.ca/wp-content/uploads/2015/ca-90/app.mp4″ width=”700″] [supsystic-gallery id=’1′]

Melita Manitoba, home of the Big Banana received a upgrade as part of Manitoba Infrastructure and Transportations 2015 Micro Surfacing Program. Pictured below West-can Sealcoating tackles the project with 2 crews minimizing traffic disruptions and public inconvenience. The Front street section was approximately 14000 square meters and was completed in one working day substantially less time was required compared to traditional paving operations. Prior to surfacing

Western Asphalt attended the 2015 SARM Convention in Saskatoon SK along with Andrew Arnill from West-Can Sealcoating. It was another great event again this year and we look forward to attending again in 2016.

Western Asphalt Products was proud to be an exhibitor at the first annual MHCA Expo North in Thompson MB.

Western Asphalt is proud to be a part of the community by sponsoring a local hockey team.